Mac Iso To Usb App

Apple uses its App Store to distribute its software, like new Mac operating systems. It’s convenient, but sometimes it can take a while for a download to finish. And if you have multiple Macs, it’s inefficient to download the new OS to each and every Mac.

That’s why I like to make a bootable external drive for the sole purpose of installing the Mac operating system. When I need to tend to a bunch of Macs, it’s much faster to use a bootable drive instead of going to each Mac, launching the App Store, searching for the operating system, downloading it (after entering my Apple ID), and then running the installer.

You can create a bootable USB flash drive with the macOS Sierra installer that’s now available. The installer software will take up nearly 5GB of storage space. Here’s how to create a bootable macOS Sierra installer drive.

Download the macOS Sierra installer

  1. Plug a USB drive into your Mac and open Disk Utility. Select your USB drive from the left panel and click on Info button. Note down the device name since we will need that later. Next, download and launch the UNetbottin utility. Select the “ Diskimage ” radio button, click “ ” to select a bootable ISO image. After locating your.
  2. It is available for Windows, Mac OS X, and Linux but with a separate file for each OS. The tool is specifically designed to create bootable Live USB drives for Ubuntu, Fedora, and other Linux distributions. UNetBootin lets you create bootable media by the use of ISO file and allows downloading the Linux distribution directly from the user.
  3. For this guide, you’ll need the Install macOS Mojave application from the Mac App Store, and a USB stick/SD card/external drive partition with capacity =8GB. How to create a macOS Mojave installer. 1) If you don’t already have the Install macOS Mojave application, download it via the Mac App Store.

I was able to make a macOS Sierra external USB boot disk in a few minutes, and the installation worked without a hitch. Also works with older versions of OS X. Diskmaker X is a popular app.

Launch the App Store app, then look for macOS Sierra in the store. (Here’s a link.) Click on the Download button, and your Mac will download the installer to your Applications folder. If it automatically launches after download, quit the installer.

If you’ve already upgraded your Mac to Sierra, the installer is removed from the Applications folder. You can download it again if you go to Purchased in the App Store. Look for macOS Sierra in the list of apps that you’ve bought, and click on the Download button. If it automatically launches after download, quit the installer.

Get an external drive

You can use a USB flash drive or a hard drive with room for the installer software. I’ve used different drives with success, including a VisionTek 120GB USB 3.0 Pocket Solid State Drive ($83 on Amazon) and an old 8GB Iomega Micro Mini Hard Drive.

Don’t worry if the drive isn’t formatted for the Mac. The drive will be reformatted automatically as part of the process. Change the name of your drive to Untitled; you need to do this for the steps below.

The quick and easy way

Mac Iso To Usb App

The process detailed below involves the Terminal. If your really don’t want to use Terminal, there are a couple of free apps you can use.

  • Install Disk Creator is a straightforward way to create a boot disk. I was able to make a macOS Sierra external USB boot disk in a few minutes, and the installation worked without a hitch. Also works with older versions of OS X.
  • Diskmaker X is a popular app. It also supports older versions of OS X.

Use the Terminal to create a boot disk

So you have your external drive, and the Sierra beta installer is in place. Now you’re going to use Terminal to create a boot drive. If you’ve never used Terminal before, don’t worry. This is pretty easy.

Here are the steps to create a macOS Sierra beta boot disk. (Apple also has these instructions.)

  1. Connect the external drive to your Mac. (In the Terminal command you will use, I use Untitled to represent your external drive. If your drive is named something else, you need to change Untitled to the name of your drive.)
  2. Launch Terminal (/Applications/Utilities/Terminal.app).
  3. Copy the following:
    sudo /Applications/Install macOS Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install macOS Sierra.app
  4. Go back to Terminal and paste the copied code at the prompt.
  5. Terminal will ask for a password. This is your user password. Terminal doesn’t display characters when you type it in. Hit Return.
  6. Terminal will tell you that it will erase your drive. To confirm that you want to continue, type Y and hit Return.
  7. You’ll see that Terminal erases your drive. When that part is done, your Mac may ask you if you want to use the drive for Time Machine. Click Don’t Use.
  8. Terminal will copy the installer file to your drive. This will take a few minutes.
  9. After copying, Terminal is done. You should see Terminal display a “Copy complete” and Done notice. You can quit Terminal and your drive is ready for use.

How to boot from the installer drive

  1. Plug your external drive into your Mac.
  2. Power up (or restart) your Mac. Press down on the Option key while the Mac boots.
  3. After a few moments, your Mac should display the Startup Manager, which will show you the available boot drives. Click on the external drive and hit Return. (You don’t need to select a network to proceed.)
  4. Your Mac will display an OS X Utilites window. If you want to install Sierra and leave the data intact, select Install OS X. If you want to start over and wipe out the data, you need to go into Disk Utility to reformat the internal drive first, and then install macOS Sierra.


How can I make a bootable Windows installation USB on Mac OS X? After upgrading to macOS Mojave, you may find that Boot Camp Assistant is no longer supported and thus creating a bootable USB turns out to be a little bit challenging. In this tutorial we’ll show you how to create Windows 10 bootable USB from ISO on Mac, by using the Terminal or third-party software like UNetbottin.

Mac os x bootable usb

Method 1: Create Windows 10 Bootable USB on Mac Using UNetbottin

For those who failed to create bootable USB with TransMac, take a look at UUByte DMG Editor. I managed to create two bootable USB from macOS Mojave and Catalina DMG file and successfully installed them on respect Mac. First, make sure the dmg file you downloaded is valid. UNetbootin is a Windows 10 USB tool Mac that is completely free to use and can be used in a scenario wherein you have to make bootable USB Windows 10 on Mac system. For this, you need to keep a USB with the.iso file downloaded in it. To create bootable USB from ISO, some of you may choose to use USB bootable software like Rufus. It is thought as one of best, free, open-source and easy-to-use Windows 10 USB tool since it can create bootable USB for different kinds of operating systems. Create a bootable USB drive for macOS X versions including El Capitan, Yosemite, Mavericks, Sierra, High Sierra, Mojave, Catalina and Big Sur.

UNetbootin is a free, open source utility that allows you to create bootable USB drives on Windows, Linux, and Mac OS X. If you’ve downloaded Windows 10 ISO image, here is how you can create a bootable Windows installer USB on Mac using UNetbootin.

  1. Plug a USB drive into your Mac and open Disk Utility. Select your USB drive from the left panel and click on Info button. Note down the device name since we will need that later.
  2. Next, download and launch the UNetbottin utility. Select the “Diskimage” radio button, click “” to select a bootable ISO image.
  3. After locating your Windows 10 ISO file, click on Open.
  4. Choose Type as USB Drive and select the device name of your USB drive (you probably would’ve noted it down earlier, so refer to that). Click OK to start installing to the USB drive.
  5. This process takes several minutes or longer, depending on the size of your selected ISO image.

Method 2: Create Windows 10 Bootable USB on Mac Using Terminal

Software update mac sierra. Of course, if you prefer not to use third-party software, you can still use the excellent Terminal app, which is a little bit more involved, but no additional software needs to be installed. Follow these steps:

  1. After connecting a USB drive to your Mac, open a Terminal window and type diskutil list to display all the disks attached to your machine. You have to figure out the disk identifier of the USB drive you need to format. In my example, my USB drive is mounted as “disk2” and it’s about 32GB.
  2. Next, run the following command to format your USB drive and name it “WIN10“, where # is a placeholder for the disk identifier of your USB drive.
    diskutil eraseDisk MS-DOS 'WIN10' GPT disk#
  3. Now, mount your Windows 10 ISO image with the command below, assuming it’s saved the Downloads folder. In my case, it is mounted as a volume named “ESD-ISO“.
    hdiutil mount ~/Downloads/your_windows_10_image.iso
  4. Finally, run the following command to copy all the files from the mounted ISO to your USB drive.
    cp -rp /Volumes/ESD-ISO/* /Volumes/WIN10/

    This command will take a while, and once it finishes, you can disconnect the mounted ISO with this command:
    hdiutil unmount /Volumes/ESD-ISO

  5. Now you should be able to boot from the USB to install Windows 10 on your Mac or Windows machine.

Conclusion

These should be the easiest ways to create a Windows 10 bootable USB from ISO on Mac, without using Boot Camp Assistant. No matter which method you prefer, be sure that you backup any important data on your USB drive, as the procedure of creating bootable USB will delete everything on it.

Create Bootable Usb From Iso Mac Mojave


To create a bootable USB drive from a DMG file on Windows, you will need to have the right utility. That's because DMG is not native on Windows. It is the Mac equivalent of an ISO file that has been in use since Apple transitioned from the IMG format with Mac OS X. A DMG file, like ISO, can be used to install macOS operating system or Mac apps. If the Mac computer was broken or crashed and couln't get into the system, but you only have access to a Windows PC, there's still a way to make a bootable macOS install USB on Windows.

This article looks at three applications that you can use to create a bootable USB drive from a DMG file in Windows. All of them have their advantages and disadvantages, which we have highlighted. You can make the best choice for you based on the information provided below. They are in no particular order of preference.

DMG Editor - Make Bootable USB from DMG File on Windows

It is not easy to find an user-friendly application when it comes to make bootable macOS Install USB. That's the reason why we spent months to develop such an app. Our latest product, DMG Editor, is a fairly robust application for creating bootable USB from a DMG file. And it works well on both Windows and Mac platforms.

It is packed with modern UI and the steps are very step to follow. After several mouse clicks and wait a couple of minutes, a bootable macOS USB is ready for OS installation or system repair. You won't find any other applications on Windows that is better than UUByte DMG Editor!

Step 1: Download UUByte DMG Editor setup.exe from this website and follow the prompt to install the software on a Windows PC. Currently, it works well on Windows 10, Windows 8 and Windows 7.

Iso

Step 2: After installation, UUByte DMG Editor will be opened automatically. And you will see three options on the main screen. At this time, click 'Burn' tab And you will be lead to a new window.

Step 3: Insert an USB drive to Windows PC and the name will show up at the right side of USB icon. If the drive name was wrong, you can click 'Change' button to pick up the right device. Next, click 'Browse' button to add the .dmg file into the program.

Step 4: When the dmg file is loaded from local hard drive, click 'Burn' button to start burning dmg to USB drive. This process will be finished in less than 10 minutes and you have to wait before you can do anything with the device.

You will be notified when the burning task is completed. Now follow the link listed on the screen to start installing macOS from USB drive

.

Create Bootable Usb From Iso Mac Mojave 10.14

Convert DMG to ISO and Create macOS Boot USB from Windows

Since ISO is a better format for Windows, you can also convert the DMG to the ISO format and then use the ISO disk image to create the bootable USB. Please note that you can't boot your Mac from bootable USB made from an ISO file, which means you'll have to convert it back to DMG prior to that. Still, it's an effective way to create bootable media for a Mac computer. Here's how it works:

Step 1: Once you have the macOS install DMG file on a Windows PC, click on Windows + R to open the run dialog box, and type in CMD, then hit Enter. When the Command Prompt opens up, use the following command to convert the file to ISO:
hdiutil convert /path/sourceimagefile.dmg -format UDTO -o /path/targetmage.iso

Step 2: Download and install UUByte ISO Editor on your PC, insert the USB drive and launch the application.

Step 3: Click Burn button on the main screen and point to the converted ISO file. The drive will be automatically detected and click on Burn icon to burn the ISO to the USB drive.

Once the ISO is burned to the file, you can insert it into a Mac and convert it back into the DMG format. Since you're converting the file twice, there's a chance that the file could get corrupted in the process. If that happens repeatedly, then try this next method.

PowerISO: Make Bootable Mac Install USB on Windows 10/8/7

Create Bootable Usb From Iso Mac Mojave Installer

This Windows utility allows you do create bootable USB from DMG on a PC. You can also edit the DMG or extract the contents, and there's also an option to copy it to a disk. For this particular exercise, we'll show you how to use PowerISO to create a bootable USB drive on Windows without having to convert the disk image into another format like ISO.

Step 1: Download and install the application on your PC.

Step 2: Insert your USB drive and launch PowerISO.

Step 3: In the Tools menu, select 'Create Bootable USB Drive… '. You will need to give admin privileges to the software. Alternatively, you can run the program as admin when you launch it.

Step 4: Select the USB drive in the section called Destination USB Drive.

Step 5: Leave all other default as they are and click on 'Start' to burn DMG to the USB drive.

Create Bootable Usb From Iso Mac Mojave Bootable

You should be able to see the progress, and a new popup will appear when the bootable media is ready. You can now eject the media and use it to run the DMG on a Mac computer.

Mac Iso To Usb Apps

Create Bootable Usb From Iso Mac Mojave Dmg

Conclusion:

Mac Iso To Usb Application

All of these methods are workable, so select the right one for you based on your level of knowledge and your preference.

Mac Iso To Usb Applications